Ford Crown Victoria /
Mercury Grand Marquis
Rear Brake Rebuild


  1. Unable to remove brake caliper mounting bolts:
    • These dudes are sometime quite hard to remove especially if they have been in place for many years. You can soak the bolts overnight with a thread release solvent (e.g., Liquid Wrench, etc.) to help loosen the bolts. You can also try using an impact wrench if you have one.
  2. Unable to re-install brake caliper; won't fit over rotor:
    • Make sure you compressed the brake caliper's cylinder all the way in. Re-do step 11 in the instructions.


Copyright © 2007-2010 by AutoClinix. All rights reserved. Unauthorized duplication in whole or in part is strictly prohibited.